Mahogany gum
Product profile:
Mahogany glue is a one-component adhesive with the appearance of dark brown or brown-brown viscous liquid. It is widely used in all kinds of mahogany splicing and assembling. Apply appropriate amount of glue evenly to the surface of the substrate and solidify under pressure. Mahogany adhesive high strength, water-resistant, high / low temperature resistance, easy to use.
usage method:
1. In order to remove the oil pollution and floating ash, too much oil can be cleaned with acetone or xylene, the surface is too smooth, too rough, and uneven will affect the bonding strength, so it should be dealt with according to the specific conditions.
2.
3. Sawtooth scraper is used on the adhesive (one side) uniform coating, the amount of glue is about 150g per square meter, the smooth surface of the adhesive can be reduced slightly, and the surface roughness can be slightly increased.
4.
5. The adhesive reacts with water. A small amount of water mist should be sprayed on the adhesive surface after coating.
6.
7. After coating, there is no need to wait, then can compound the adhesive.
8.
9. After compound must use press or heavy object press tight, solidify before loosening.
10.
11. Pressure time: the pressure time is related to the air temperature and relative humidity at the time, ranging from 5 to 12 hours and reaching the best in 24 hours.。
product model:
Project name / Model |
Mahogany gum |
surface |
Dark brown or brown sticky fluid |
Solid content (%) |
>48 |
Viscosity CP.S |
>8000 |
pH value |
5-7 |
Maintenance time |
24 hours 48 hours |
specifications |
20KG/30KG |
Suitable material |
All kinds of mahogany |
quality guarantee period |
12 months |