一
Splicing adhesive
1 Product description:
Real beef plate adhesive is a kind of two-component macromolecule copolymer. By using advanced technology, a new water-based polymer-isocyanate series wood adhesive has been developed and produced by using new water-based polymer and imported raw materials such as USA, Japan and so on. The product quality index is implemented according to Japanese F4 standard, which is in line with Japanese F / F and European E1 environmental protection standards.
2 Technical parameters
Project name
model
1998
1997
1996
1995
1926
1916
basis
Modified polymer copolymer emulsion
Modified polymer copolymer emulsion
Modified polymer copolymer emulsion
Modified polymer copolymer emulsion
Modified polymer copolymer emulsion
Modified polymer copolymer emulsion
surface
ivory
ivory
ivory
ivory
ivory
ivory
Solid content% ≥
50
50
50
50
48
48
pH value
5-7
5-7
5-7
5-7
5-7
5-7
Viscosity mpa.s (25 ℃) ≥
8500
8500
8500
8000
8000
8000
Initial curing time (20 ℃ ~ 30 ℃)
High frequency hot pressing for 3 minutes
40-90minute
40-90minute
40-90minute
40-90minute
40-90minute
Coating amount
150-200can
150-200can
150-200can
150-200can
130-180can
130-180can
construction technology
Mechanical or manual glue
Mechanical or manual glue
Mechanical or manual glue
Mechanical or manual glue
Mechanical or manual glue
Mechanical or manual glue
Pressure c㎡ mpa
1.2-1.5
1.2-1.5
1.2-1.5
1.2-1.5
0.8-1.2
0.8-1.2
Suitable wood
Mahogany
Hard hardwood
Hardwood
Fraxinus mandshurica
Miscellaneous rubber wood
Cork-like Pinus sylvestris var. mongolica
builder
Bicomponent
Bicomponent
Bicomponent
Bicomponent
Bicomponent
Bicomponent
quality guarantee period(10℃~30℃)
12Months
12Months
12Months
12Months
12Months
12Months
Product characteristics
The adhesive is a waterborne adhesive and does not use organic solvents. 2, no heating, cold press can obtain good adhesion strength, water resistance, heat resistance, solvent resistance, aging resistance and other properties. 3, the adhesive is not a simple physical bonding, wood and adhesive chemical reaction, so that the adhesive and adhesive is really one. 4, neutral condition is not cured, non-formaldehyde system, does not contain phenol, amine substances, splint glue does not produce harmful gases, no pollution, non-flammable, non-dyeing of adhesive layer. 5, the pressure time is short, the operation is convenient, the use temperature range is wide.
Usage: this adhesive is a special adhesive for wood furniture manufacturing. It is used in doors and windows, wood flooring, hardwood, building board, integrated wood gluing, surface bonding of decorative panels, production of advanced wood products, etc.
4 usage:
1, mix the main agent and curing agent in a proportion of 100 / 8 / 15 and then use.
2. Generally, the amount of glue applied is about 100-240g/m2. 3, pressure: above cork 0.6Mpa; hardwood 1.0Mpa above. 4, pressure time: not less than 60 minutes at 15 ℃, not less than 20 minutes at 30 ℃.
5. Relief maintenance:
1, after unloading, should store for a period of time to enter the next processing process. 2. Test at least 3 days later when testing is required to ensure that the test results are accurate. When you do a boiling test, it takes seven days to test.