News classification
Crosslinking and curing adhesive film
Time：2018-10-31 09:00:51 Page view (1498)
Easy to use, characterized by spray adhesives and uses 1. UR7505 is a solventless one component polyurethane adhesive. Pollution-free. (2) uR75Q5 is a cross-linking and curing adhesive film with excellent elasticity, aging resistance, good bonding strength, high transparency and odorless. (3) It is suitable for the composite of polyethylene, polypropylene, nylon and polyester films pretreated by celluloid.
It can not be used in ordinary compound machine. (2) I-P7505 adhesives are coated by the coating system of the solvent-free laminator with very low coating quantity. Construction technology (1) uR7505 is specially used in the solvent-free laminator. And directly coated by heating (adjustable) roll gap. (3) The temperature of coating roll is 80100 C. It is suggested that uR7505 adhesive be preheated for 2 hours in an airtight container at 6080 C before use and then poured. (2) uR75Q5 is a cross-linked and solid-sprayed adhesive film with excellent elasticity, aging resistance, good bonding strength, high transparency and odorless. (3) It is suitable for the composite of polyethylene, polypropylene, nylon and polyester films pretreated by celluloid.
20kg/ barrel. UR7505 adhesives are stored in dry and cool places, packed and packed in storage and transportation drums before being opened and unmixed. The storage period can be up to 6 months. The open barrel should be sealed immediately when not in use to prevent the moisture reaction between glue and air. It should be used up in a short time. If the glue is stored in a closed container and not sealed, the glue can be reused in a short time.
Convenience, characteristics and uses: uR7505 is a solventless one component polyurethane adhesive. Dirt free compound machine. And directly coated by heating (adjustable) roll gap. (3) The coating roll temperature is 80100 C. It is suggested that uR7505 adhesive be preheated for 2 hours in a sealed container at 6080 C before spraying, then inverted the coating roll gap, and the coating temperature should be adjusted to the application temperature. (4) For transparent composite film, the amount of coating is 1.81.2g/m2. For paper, a higher amount of coating is needed. The moisture (humidity) reacted with uR7505 can be obtained by spraying water into the roll gap in order to achieve rapid and complete ripening and good bonding strength.
20kg/ barrel. UR7505 adhesives are stored in dry and cool places, packed and packed in storage and transportation drums before being opened and unmixed. The storage life can be up to 6 months. The open barrel should be sealed immediately to prevent the moisture reaction between the glue and the air. The glue should be sprayed out and used up in a short time. If the glue is stored in a closed container and not sealed, the bracelet can be reused in a short time.
It can not be used in ordinary compound machine. (2) I-P7505 adhesives are coated by a low-volume coating system with solvent-free composite pole spraying. Construction technology (1) uR7505 is specially designed for solvent-free composite machine. And directly coated by heating (adjustable) roll gap. (3) The coating roll temperature is 80100 C. It is suggested that uR7505 adhesive be preheated for 2 hours in a sealed container at 6080 C before use, then inverted the coating roll gap, and the coating temperature should be adjusted to the application temperature. (4) the amount of coating is usually dyed. (2) UR75Q5 is a cross-linking and curing adhesives, which is used to lay the coating roll gap, and adjust the coating temperature to the use temperature. (4) For transparent composite film, the amount of coating is 1.81.2g/m2. For paper, a higher amount of coating is needed. The moisture (humidity) reacted with uR7505 can be obtained by spraying water into the roll gap in order to achieve rapid and complete ripening and good bonding strength.
20kg/ barrel. UR7505 adhesives are stored in dry and cool places, packed and packed in storage and transportation drums before being opened and unmixed. The storage life can be up to 6 months. The open barrel should be sprayed and sealed immediately to prevent the moisture reaction between the glue and the air. It should be used up in a short time. If the glue is stored in a closed container and not sealed, the bracelet can be reused in a short time.
Convenience, characteristics and uses: uR7505 is a solventless one component polyurethane adhesive. Non-polluting film spraying gum has excellent elasticity, anti-aging, good bonding strength, high transparency, odorless. (3) It is suitable for the composite of polyethylene, polypropylene, nylon and polyester films pretreated by celluloid.
It can not be used in ordinary compound machine. (2) I-P7505 adhesives are coated by the coating system with very low spraying volume in solvent-free laminator. Construction technology (1) uR7505 is specially designed for insoluble and transparent composite films with sufficient coating volume of 1.81.2g/m2, which requires a higher coating volume for paper composite. The moisture (humidity) reacted with uR7505 can be obtained by spraying water into the roll gap in order to achieve rapid and complete ripening and good bonding strength.
It can not be used in ordinary compound machine. (2) I-P7505 adhesives are coated by the coating system of the solvent-free laminator with very low coating quantity. Construction technology (1) uR7505 is specially used in the solvent-free laminator. And directly coated by heating (adjustable) roll gap. (3) The temperature of coating roll is 80100 C. It is suggested that uR7505 adhesive be preheated for 2 hours in an airtight container at 6080 C before use and then poured. (2) uR75Q5 is a cross-linked and solid-sprayed adhesive film with excellent elasticity, aging resistance, good bonding strength, high transparency and odorless. (3) It is suitable for the composite of polyethylene, polypropylene, nylon and polyester films pretreated by celluloid.
20kg/ barrel. UR7505 adhesives are stored in dry and cool places, packed and packed in storage and transportation drums before being opened and unmixed. The storage period can be up to 6 months. The open barrel should be sealed immediately when not in use to prevent the moisture reaction between glue and air. It should be used up in a short time. If the glue is stored in a closed container and not sealed, the glue can be reused in a short time.
Convenience, characteristics and uses: uR7505 is a solventless one component polyurethane adhesive. Dirt free compound machine. And directly coated by heating (adjustable) roll gap. (3) The coating roll temperature is 80100 C. It is suggested that uR7505 adhesive be preheated for 2 hours in a sealed container at 6080 C before spraying, then inverted the coating roll gap, and the coating temperature should be adjusted to the application temperature. (4) For transparent composite film, the amount of coating is 1.81.2g/m2. For paper, a higher amount of coating is needed. The moisture (humidity) reacted with uR7505 can be obtained by spraying water into the roll gap in order to achieve rapid and complete ripening and good bonding strength.
20kg/ barrel. UR7505 adhesives are stored in dry and cool places, packed and packed in storage and transportation drums before being opened and unmixed. The storage life can be up to 6 months. The open barrel should be sealed immediately to prevent the moisture reaction between the glue and the air. The glue should be sprayed out and used up in a short time. If the glue is stored in a closed container and not sealed, the bracelet can be reused in a short time.
It can not be used in ordinary compound machine. (2) I-P7505 adhesives are coated by a low-volume coating system with solvent-free composite pole spraying. Construction technology (1) uR7505 is specially designed for solvent-free composite machine. And directly coated by heating (adjustable) roll gap. (3) The coating roll temperature is 80100 C. It is suggested that uR7505 adhesive be preheated for 2 hours in a sealed container at 6080 C before use, then inverted the coating roll gap, and the coating temperature should be adjusted to the application temperature. (4) the amount of coating is usually dyed. (2) UR75Q5 is a cross-linking and curing adhesives, which is used to lay the coating roll gap, and adjust the coating temperature to the use temperature. (4) For transparent composite film, the amount of coating is 1.81.2g/m2. For paper, a higher amount of coating is needed. The moisture (humidity) reacted with uR7505 can be obtained by spraying water into the roll gap in order to achieve rapid and complete ripening and good bonding strength.
20kg/ barrel. UR7505 adhesives are stored in dry and cool places, packed and packed in storage and transportation drums before being opened and unmixed. The storage life can be up to 6 months. The open barrel should be sprayed and sealed immediately to prevent the moisture reaction between the glue and the air. It should be used up in a short time. If the glue is stored in a closed container and not sealed, the bracelet can be reused in a short time.
Convenience, characteristics and uses: uR7505 is a solventless one component polyurethane adhesive. Non-polluting film spraying gum has excellent elasticity, anti-aging, good bonding strength, high transparency, odorless. (3) It is suitable for the composite of polyethylene, polypropylene, nylon and polyester films pretreated by celluloid.
It can not be used in ordinary compound machine. (2) I-P7505 adhesives are coated by the coating system with very low spraying volume in solvent-free laminator. Construction technology (1) uR7505 is specially designed for insoluble and transparent composite films with sufficient coating volume of 1.81.2g/m2, which requires a higher coating volume for paper composite. The moisture (humidity) reacted with uR7505 can be obtained by spraying water into the roll gap in order to achieve rapid and complete ripening and good bonding strength.
关注官方微信