News classification
Introduction to the characteristics of genuine bovine solid wood adhesive
Time:2018-10-30 08:52:02 Page view (985)
Genuine bovine solid wood adhesive is a kind of board adhesive, which consists of vinyl polymer emulsion (latex) and polyisocyanate (curing agent).
It is mainly used for bonding wood products such as laminated lumber. It is suitable for unstructured and structural materials such as laminated wood, etc. the main agent is the polyvinyl acetate emulsion with excellent waterproof effect. The curing agent is generally isocyanate. The color is mainly milky white viscous liquid and the curing agent is light brown.
_This product is a two-component polymer copolymer, a new type of water-borne polymer-isocyanate series wood adhesive developed and produced by advanced technology.
_has good waterproofing, high bonding strength, environmental protection, excellent water resistance, weatherability, extremely high bonding strength, fast drying speed, good toughness and impact resistance. It can be tested by Japanese Agricultural Standard (JAS), and its strength level is D4.
A two-component water-based adhesive composed of vinyl emulsion and aromatic polycyanate ester is non-toxic, tasteless and non combustible.
__________8595
___________85
1, the adhesive is an aqueous binder and does not use organic solvents.
_2. Good bonding strength can be obtained by cold pressing without heating. It has the properties of water resistance, heat resistance, solvent resistance and aging resistance.
_3. The adhesive is not simple physical bonding. The chemical reaction between wood and adhesive makes the adhesive and the adhesive truly become one.
_4. The neutral condition is not solidified, belongs to non-formaldehyde system, does not contain phenols and amines, does not produce harmful gases, pollution-free, non-flammable, and does not dye the bonding layer.
5, the pressure time is short, the operation is convenient, the temperature range is wide.
It is mainly used for bonding wood products such as laminated lumber. It is suitable for unstructured and structural materials such as laminated wood, etc. the main agent is the polyvinyl acetate emulsion with excellent waterproof effect. The curing agent is generally isocyanate. The color is mainly milky white viscous liquid and the curing agent is light brown.
_This product is a two-component polymer copolymer, a new type of water-borne polymer-isocyanate series wood adhesive developed and produced by advanced technology.
_has good waterproofing, high bonding strength, environmental protection, excellent water resistance, weatherability, extremely high bonding strength, fast drying speed, good toughness and impact resistance. It can be tested by Japanese Agricultural Standard (JAS), and its strength level is D4.
A two-component water-based adhesive composed of vinyl emulsion and aromatic polycyanate ester is non-toxic, tasteless and non combustible.
__________8595
___________85
1, the adhesive is an aqueous binder and does not use organic solvents.
_2. Good bonding strength can be obtained by cold pressing without heating. It has the properties of water resistance, heat resistance, solvent resistance and aging resistance.
_3. The adhesive is not simple physical bonding. The chemical reaction between wood and adhesive makes the adhesive and the adhesive truly become one.
_4. The neutral condition is not solidified, belongs to non-formaldehyde system, does not contain phenols and amines, does not produce harmful gases, pollution-free, non-flammable, and does not dye the bonding layer.
5, the pressure time is short, the operation is convenient, the temperature range is wide.