News classification
Application of pressure plate adhesive products
Time:2018-10-30 08:50:36 Page view (966)
Uses of plywood products: Mainly used for wood and wood compression, plywood compression and process products bonding. It is especially suitable for the production process of display cabinets and doors.
Usage: 1. Evenly apply RX-383 white latex to the surface (machine coating or hand coating).
2, general single side gluing is fit.
3, pressure: 5-7kg/cm pressure time: 4-6 hours can be transferred to the next process (hot pressing for 3-5 minutes).
Technical parameters: appearance: milk white high viscosity liquid;
Solid content: 40% + 1%;
Viscosity: 35000-40000mps
Average particle size: -3 C.
Matters needing attention:
1, before use, please mix evenly.
2. If it touches the skin or body parts, it should be cleaned immediately; if it falls on the ground, it should be treated by adsorption method, and attention should be paid to dredging when washing with water.
3, after using this product, the container should be sealed.
Storage methods:
1, store in a cool place at a temperature of 5 -35 C;
2, the product should be kept in good ventilation.
3, always keep the container lid tightly closed.
Usage: 1. Evenly apply RX-383 white latex to the surface (machine coating or hand coating).
2, general single side gluing is fit.
3, pressure: 5-7kg/cm pressure time: 4-6 hours can be transferred to the next process (hot pressing for 3-5 minutes).
Technical parameters: appearance: milk white high viscosity liquid;
Solid content: 40% + 1%;
Viscosity: 35000-40000mps
Average particle size: -3 C.
Matters needing attention:
1, before use, please mix evenly.
2. If it touches the skin or body parts, it should be cleaned immediately; if it falls on the ground, it should be treated by adsorption method, and attention should be paid to dredging when washing with water.
3, after using this product, the container should be sealed.
Storage methods:
1, store in a cool place at a temperature of 5 -35 C;
2, the product should be kept in good ventilation.
3, always keep the container lid tightly closed.