News classification
Genuine bovine woodworking adhesive is a water-soluble polymer emulsion adhesive.
Time：2018-10-29 16:22:13 Page view (1491)
Genuine bovine woodworking adhesive is a water-soluble polymer emulsion adhesive. It has certain water resistance and heat resistance, curing at room temperature and no foaming of glue. It is suitable for softwood, softwood, poplar and other softwood species. The film is tough, not blackened and brittle, and finished wooden products pass the LY/T1601-2002 test standard.
Puzzle range: Yoshiki Matsukiki and so on cork.
Curing agent 8% curing agent
Main agent
Polymer type ethylene vinyl acetate polymer
The appearance is milky white viscous liquid.
Total solid content (%) 35 + 2
Viscosity (25 degrees) 12000 + 2000cps
PH value 6.0-8.0
The minimum film forming temperature is 3 degrees centigrade.
Curing agent:
Appearance brown liquid
Viscosity (25 degrees) > 200
This product is suitable for cold pressing operation process.
Ratio: 100:8 (weight ratio) is the best ratio.
Gumming: it can be used in the automatic mixing system. The one side 200-280g/m2 and double sided cloth are better.
Pressure (cold pressing):a. pressure: conifer species 10-15 kg/cm2;
B. compression time: 45-120 minutes;
The use period of hand gluing is as follows: the best mixture should be used in 20-30 minutes.
Health period: 72 hours after pressure relief.
Material quality control: a. Wood moisture content 8-12%. B. Material splicing plane accuracy control within (+0.1mm), with fresh planing surface splicing is the best.
Puzzle range: Yoshiki Matsukiki and so on cork.
Curing agent 8% curing agent
Main agent
Polymer type ethylene vinyl acetate polymer
The appearance is milky white viscous liquid.
Total solid content (%) 35 + 2
Viscosity (25 degrees) 12000 + 2000cps
PH value 6.0-8.0
The minimum film forming temperature is 3 degrees centigrade.
Curing agent:
Appearance brown liquid
Viscosity (25 degrees) > 200
This product is suitable for cold pressing operation process.
Ratio: 100:8 (weight ratio) is the best ratio.
Gumming: it can be used in the automatic mixing system. The one side 200-280g/m2 and double sided cloth are better.
Pressure (cold pressing):a. pressure: conifer species 10-15 kg/cm2;
B. compression time: 45-120 minutes;
The use period of hand gluing is as follows: the best mixture should be used in 20-30 minutes.
Health period: 72 hours after pressure relief.
Material quality control: a. Wood moisture content 8-12%. B. Material splicing plane accuracy control within (+0.1mm), with fresh planing surface splicing is the best.
关注官方微信