Sealing glue use process and precautions:
1. Do not add water, do not add other substances, do not mix with other glue.
2. The adhesive layer can not be painted too thin. After the hand seal is finished, please press it. If it needs to be aired, keep the glue still in a wet state at the latest, and press it before it is completely dry. After the machine is sealed, check the pressing and curing. If there is a mouth, please press or replace the drying speed.
3. After the glue, please keep the two bonding surfaces in good contact and press for more than half an hour.
4. A small test of the same conditions should be done before mass production
5. After applying the glue for 24 hours, please check the bonding condition. If the paper body is damaged, the quality will not change for a long time. If the paper body is not damaged, please check if the operation process is proper or check whether the glue is suitable for the current operation process.
6. Please pay special attention to the fact that some glazing oils have poor adhesion and must be tested before they can be used.

Shanghai Zhenniu Chemical Co., Ltd.