The characteristics of the puzzle
The characteristics of the puzzle glue:
1. The binder is an aqueous binder and does not use an organic solvent.
2, no need to heat, cold pressure can get good bonding strength, with water resistance, heat resistance, solvent resistance, aging resistance and other properties.
3. The adhesive is not a simple physical bond. The wood reacts chemically with the adhesive to truly integrate the adhesive with the adhesive.
4, Neutral conditions are not solidified, non-formaldehyde, no phenol, amine substances, no harmful gases, no pollution, non-flammable, no dyeing on the bonding layer.
5, the pressurizing time is short, the operation is convenient, and the use temperature range is wide.
The main use of jigsaw glue is laminated with jigsaw puzzle factory, furniture factory and wooden handicraft factory. Most of the glue on the market is a two-component glue with a curing agent. The two-component effect will be stronger than the single component, and the water resistance and dry speed will be significantly improved. The general amount is 10:1. In special cases, the curing agent can be added, such as when the weather is wet. After the wood and wood are bonded, there is a process of pressurization. The general time is about 2 hours. In humid weather, it is necessary to extend the pressurization time to avoid unnecessary loss. The used jigsaw glue needs to be sealed to avoid causing the glue surface to dry or other substances to fly into the glue, thus affecting the use of the glue. When major manufacturers choose the glue, they should choose a well-known glue brand and a guaranteed manufacturer. This will be more secure for your product.
Shanghai Zhenniu Chemical Co., Ltd.