Hot pressing adhesive construction process
Hot pressing adhesive construction process:
1. The bonding surface must be kept flat, especially the wooden door.
2. The water content of wood moisture must be controlled at 12%, and the moisture content exceeding 15% will seriously affect the drying time and strength.
3. Repeated pressurization of the press during the production process will result in failure of bonding and debonding and cracking.
4, hand-applied veneer is recommended to apply two times of glue, and ensure that the glue is not completely dry under the ironing, reducing the phenomenon of veneer foaming.
5, the use temperature is above 5 °C
Shanghai Zhenniu Chemical Co., Ltd.