Hot melt adhesive product details

Hot melt adhesive product details

Appearance: pure white
Main ingredients: EVA
Solid content: 100%
Toxicity: non-toxic
Softening point: 70±10°C
Melt viscosity: 3000±1000mpa.s/160°C
Recommended temperature: 140-150 ° C
Features: Universal pressure sensitive adhesive; wide range of applications, can be used for hook and loop fasteners, label paper, shoe materials, paper packaging, etc.;
Instructions for use: Applicable to dispensers, glue dispensers, glue dispensers; glue dispensers can be put on after preheating, and can be used after 10-15 minutes.

※Package: 25 kg paper bag
※Storage conditions: ventilated, dry, cool place;
※ Equipment cleaning method: You can consult the equipment manufacturer for cleaning equipment method, or clean the equipment with mineral oil or paraffin at 150 °C, then rinse with hot melt adhesive, the best temperature should not exceed 160 °C.
  Instructions for use:
The hot melt adhesive is heated to the use temperature, and is sprayed or coated on the adherend. The bonding and setting work must be completed within the opening time of the adhesive, and the clamped object is cooled to room temperature.
The storage glue in the rubber pot should be in an appropriate amount. It is strictly forbidden to repeatedly melt the glue. Heating for a long time and repeated melting of the glue will accelerate the aging of the glue.
Due to the use of the substrate, environment, and season, the temperature and opening time are appropriately adjusted.

  ※Precautions:
1. The place of use should be well ventilated and away from open flames.
2. Avoid contact with the eyes and skin after melting.
3. If the dissolved material comes into contact with the skin, immediately immerse the injured skin in water or rinse with cold water. After cooling, remove the sticking material and then rub the silicone oil to rub the redness and send it to the doctor.

Shanghai Zhenniu Chemical Co., Ltd.