Development and application of furniture white latex

Oily laminating adhesive
1. Oily laminating adhesive is suitable for the bonding of plastic and plastic interface and manual pasting of various paper pulp BOPPP paper PET. When bonding the interface with a large rebound force, it must be used in a suitable manner for pressing.
2, this product has very good anti-aging, using this rubber product in the harsh environment of -50 degrees to 60 degrees for a long time, the adhesive layer can maintain the original basic performance.
Technical indicators

Preface Item 2016C
1 External features Light yellow liquid
2 Glue viscosity 700～900
3 solid content (%) 50
4 Acid value 2～3koHmg∕g (neutral)
5 Hazard Flammable danger
 

Use reminder

1. Oily laminating adhesive should not be used at the same time as other chemical components. If delamination is found to be an expired phenomenon, please stop using it.

2, the product is non-structural glue, not suitable for excessive pressure.

3. Please keep the product sealed and slightly precipitated as a normal phenomenon. Stir well and mix well before use.

4. The storage period of oily laminating adhesive is half a year, and it can be used continuously after more than half a year without inspection.

5, this product must be stored in a shade of more than 6 degrees.

6. Our company can produce samples according to different needs of customers. Users can try them according to their specific conditions.

Instructions
1. Spread the product evenly on the surface to be bonded to maintain a certain thickness and bonding area.
2. The size of the amount of glue applied is determined according to the required overlap, the amount of glue absorbed on the paper surface and the specific requirements of the process operation.
3. The lap time is adjusted according to the surface condition of the adherend and the ambient temperature. The lap time after painting is generally in the range of 4 to 12 minutes.

Shanghai Zhenniu Chemical Co., Ltd.