Physical and chemical indicators of jigsaw glue
Physical and chemical indicators of jigsaw glue
Appearance: A latex white viscous colloid; B glue is light pink liquid
Solid content: A glue (32 ± 2)% B glue (57 ± 2)%
Viscosity: A glue (12000±2000) centipoise (3#/6ypm/25°C)
B glue (800±200) centipoise (1#/12ypm/25°C)
P H value: A glue 1.0-2.0 B glue 9.0-10
2. Product characteristics
This product is a two-component high-performance water-soluble glue, non-toxic and non-polluting. The adhesive has high bonding strength and good toughness; solvent resistance, water resistance, aging resistance, drying speed of 20-60 seconds, which is initially fixed, and has been fixed after 2 hours. Basic curing; saving time and labor, most suitable for continuous production.
three. Use of the product
Mainly used for wood splicing below 80 cm, handicraft bonding, MDF and wood flattening, office desk wood edge sealing; door panel splicing.
four. Instructions
1. Open the package and use it directly. It is forbidden to apply ironware to avoid blackening the wood.
2. Due to the large deformation of the wood, the wood that has been planed on the same day must be bonded within 24 hours.
3. Evenly apply the AB glue to the plate to be bonded separately, press it by hand or with a screw, and the pressure of the glue should not exceed three minutes.
Fives. Storage period
Store at room temperature for 3 months, store in a cool, ventilated place; if the storage temperature exceeds 25 °C, the storage period will be shortened; if B glue has a paste-like mucus, A glue will change color and should be stopped.
Shanghai Zhenniu Chemical Co., Ltd.