Use and method of white latex
Use of white latex:
Can be widely used in bonding paper products (wallpaper), as well as waterproof coatings and wood adhesives. Bonding of wooden materials. It is water as dispersing agent, safe, non-toxic, non-combustible, easy to clean, solidified at room temperature, has good adhesion to wood, paper and fabric, high bonding strength, colorless and transparent rubber layer after curing, toughness Good, does not pollute the bonded material; the emulsion has good stability and the storage period can be more than half a year. Therefore, it is widely used in printing and binding and furniture manufacturing. It is used as a binder for paper, wood, cloth, leather, ceramics, etc. It can also be used as a modifier for binders such as phenolic resin and urea-formaldehyde resin for the production of polyvinyl acetate. Latex paint, etc.
How to use white latex
1. Before using white latex bonding materials, the surface of the material to be bonded must first be cleaned. For example, if there is dirt such as oil, water or dust on the surface of the material, the material should be cleaned with a detergent such as alcohol. The surface is cleaned to ensure that the surface of the material is clean and dry when white latex is used for bonding.
2. When applying glue, if it is hand-applied, it is necessary to apply a white latex evenly to the surface of one of the required bonding materials, and then to another material to be bonded. After the bonding, the two materials are pressed, and the material can be fixed by a clip or a tape that can fix the two materials. In general, the material can be positioned after 2 hours of pressing. The time to fully cure is 24 hours. (Note: The curing time of the glue will be affected by the humidity and temperature in the room. If it is used under low temperature and humidity, the positioning time and the complete curing time of the white latex will be delayed accordingly. Otherwise, if it is dry and ventilated Under the environment, the positioning time and complete curing time of white latex will be shortened.)
3, white latex should not be used in order to save costs, but add white water to the white latex to dilute. Because this will affect the adhesion of white latex.
Shanghai Zhenniu Chemical Co., Ltd.