News classification
Hot pressing adhesive characteristics and uses
Time:2019-05-31 11:58:35 Page view (1002)
Hot pressing adhesive characteristics and uses
Hot pressing adhesive features and uses: good initial tack and high bonding strength. Curing at room temperature, water resistance, heat curing can improve water resistance. Suitable for the production process of veneer veneer.
Construction process: 1. The substrate should be free of oil, dust, impurities, etc.
2. Manual or mechanical glue.
3. After the glue is applied, it can be attached.
4. The pressure needs to be pressed, the pressure is 1~5mpa. The cold pressing time is more than 2, and the hot pressing time is several minutes.
First, technical parameters
Appearance: milky white
Solid content: 20±2%
Viscosity: 40000-45000mpa.S (25 ° C)
PH value: 5 ~ 6
Storage: cool, dry place, one year storage period
Shanghai Zhenniu Chemical Co., Ltd.
Hot pressing adhesive features and uses: good initial tack and high bonding strength. Curing at room temperature, water resistance, heat curing can improve water resistance. Suitable for the production process of veneer veneer.
Construction process: 1. The substrate should be free of oil, dust, impurities, etc.
2. Manual or mechanical glue.
3. After the glue is applied, it can be attached.
4. The pressure needs to be pressed, the pressure is 1~5mpa. The cold pressing time is more than 2, and the hot pressing time is several minutes.
First, technical parameters
Appearance: milky white
Solid content: 20±2%
Viscosity: 40000-45000mpa.S (25 ° C)
PH value: 5 ~ 6
Storage: cool, dry place, one year storage period
Shanghai Zhenniu Chemical Co., Ltd.
Down: (0)