Real cattle hot melt adhesive packaging
Real cattle hot melt adhesive packaging
  Effective substance: 100%
  Executive Standard: Enterprise Standard
  Appearance: yellow block
  Softening point °C: (80-105 °C) ± 5 ° C
  Melt viscosity: (300-1100) ± 200mpa.s
  Curing time: 5-20 seconds
  Recommended temperature °C: 150 -180
  The above information is for reference only. The factory can produce various products according to different requirements of users.
  This product has the characteristics of environmental protection, no toxicity, high viscosity, fast curing, convenient operation, and no carbonization in continuous use. It needs to be operated by professional hot melt equipment. The construction temperature generally does not exceed 190 ° C, otherwise it is easy to decompose or even carbonized hot melt adhesive. For long-time working hot melt plastic tanks or carbonized plastic tanks, special cleaning oil can be used for cleaning.
   Precautions:
   1. Please try before using this product.
   2. The use temperature should not exceed 200 ° C, so as not to cause carbonization decomposition, nor lower than the use temperature, otherwise reduce the bonding strength.
   3. The hot melt glue tank in operation must be covered to prevent the dirt from falling in. At the same time, the principle of “first in, first out” and “how much to use” should be followed to ensure the service life and bonding effect of the hot melt adhesive.
   4. Place in a cool, ventilated place.
   5. Avoid moisture, hot sun and high temperature baking during storage and transportation.
   6. Pack 25 kg / bag.
Shanghai Zhenniu Chemical Co., Ltd.