Epoxy paste
Epoxy paste
1. Introduction
1A agent: main resin, transparent and viscous liquid, standard type main agent.
2B agent: curing agent, yellow-brown viscous liquid, standard curing agent.
  Working time at 325 ° C (PotLife is 50-60 minutes.
Second, use
 1 Wood veneer gluing: Iron wood glue is a 100% effective ingredient, so the caulking property is particularly good. After solidification, it fills the wood gap, and does not violently shrink and expand due to climate change. It is suitable for gluing places with large error in taro hole. For example, the chair legs are round and 45 degree angled, and the backrest group and the armrest corners have sufficient strength and gap filling during cutting, so the wood that can maintain the joint angle will not tear.
 2 Wood materials, metal materials and non-metal materials such as glass, cement and ceramics have good bonding properties, and hard or foamed PVC can be glued.
Three. How to use
 The proper ratio of the main agent plus curing agent is 10.60.8 weight ratio, that is, the main agent resin transparent 100g plus curing agent yellow brown 6080g is mixed according to the ratio and fully stirred before being used. When the curing agent is increased, the curing speed will be faster, but the resin is hard and brittle, so the weight of the curing agent should not exceed 80g, otherwise the strength will be greatly reduced and the curing time will increase or the resin will not cure.
Four matters needing attention
   Wipe or wash with xylene or IBA acetone or the above mixed solution.
   This product is different from AB two-sided separation coating jigsaw glue, please do not confuse the noun and usage. This agent must be mixed with the main agent and curing agent before use. Do not apply the curing agent on one side of the main agent, which will lead to the main agent. The curing agent and the curing agent cannot be uniformly mixed, and the curing is incomplete.
   This information comes from practical experience and laboratory testing. As a guide for selecting products and work, there are many factors in the process of rubber industry in the wood furniture factory, such as wood drying conditions, machinery and equipment, manual management, operating climate, manufacturing environment, and tree species. The blending ratio, pressurization time and temperature all affect the gluing effect, and are not subject to the company's restrictions. Therefore, the company only provides adhesives for after-sales service and customer satisfaction. Please select after testing.
V. Storage: The properties of the agent are stable. The shelf life is 1 year at 25 °C. Please keep it sealed. Do not expose it to direct sunlight.
Shanghai Zhenniu Chemical Co., Ltd.