News classification
Hot pressing adhesive main features
Time:2019-04-03 13:57:47 Page view (871)
Hot pressing adhesive main features
Hot pressing adhesive main features
Type: Water based
Appearance: beige liquid
Viscosity: 18000-28000 CPS, Brookfield sp. 5, 20 rpm., 25
PH value: 3-5
Solid content: 45-2%
Powdering point: 5 degrees
Hot pressing adhesive main features:
1, hot pressing time is short (1-3min)
2. The amount of glue per unit area is small (the amount of glue is 80-120g/m2), which reduces the cost of the enterprise.
3, single component, no glue adjustment
4, less glue, fast curing, to avoid the phenomenon of penetration
5, good flexibility, avoid cracking and chipping of veneer
6, long opening time (6-10min), easy for workers to operate
7, environmental protection, low VOC emissions or formaldehyde-free solutions
Shanghai Zhenniu Chemical Co., Ltd.
Hot pressing adhesive main features
Type: Water based
Appearance: beige liquid
Viscosity: 18000-28000 CPS, Brookfield sp. 5, 20 rpm., 25
PH value: 3-5
Solid content: 45-2%
Powdering point: 5 degrees
Hot pressing adhesive main features:
1, hot pressing time is short (1-3min)
2. The amount of glue per unit area is small (the amount of glue is 80-120g/m2), which reduces the cost of the enterprise.
3, single component, no glue adjustment
4, less glue, fast curing, to avoid the phenomenon of penetration
5, good flexibility, avoid cracking and chipping of veneer
6, long opening time (6-10min), easy for workers to operate
7, environmental protection, low VOC emissions or formaldehyde-free solutions
Shanghai Zhenniu Chemical Co., Ltd.
Down: (0)